A water treatment solution consists of several treatment steps, e.g. filtration, softening, ultrafiltration, reverse osmosis or ion exchange demineralization - all controlled from a central control cabinet. These units must be put together on site.

If the end-user or the contractor is uncertain if the installation can be carried out locally within the determined economic and temporal scopes, it can be an advantage to order a water treatment plant (container or frame-mounted) which is ready for use when supplied.

The solution is complete with all internal piping and wiring factory-built. The whole plant has been performance and pressure tested in our factory. This safety can be achieved with a TREATMENT frame-mounted plant or a container-installed plant.

We have constructed many different custom-made plants adapted to specific demands and wishes.

In order to facilitate installation and transport major water treatment plants can be installed in a container in such a way that the plant can be commissioned in a very short time. Typically the capacity is 3 - 100 m³/h. Usually a container is equipped with a pressure filter,GAC filter, disinfection systems, softening plant,RO plant for sea desalination, and a reservoir. The plants are mounted in a non-freezing and insulated 20 feet container or standard 40 feet containers.

Here too, we are ready to meet your needs with the appropriate water systems, dosing, measurement and control technology and our extensive know-how for you.

Innogreen supplies any water treatment in a containerizable version with various available options based on :

Plant size, Accessibility requirements, Site temperature, ATEX zone requirements Containerization of a water treatment plant does not only include the supply of a container, But also consists of several treatment steps, e.g. filtration, softening, ultra filtration, reverse osmosis or ion exchange demineralization - all controlled from a central control cabinet. These units must be put together on site.

If the end-user or the contractor is uncertain if the installation can be carried out locally within the determined economic and temporal scopes, it can be an advantage to order a water treatment plant (container or frame-mounted) which is ready for use when supplied.

The solution is complete with all internal piping and wiring factory-built. The whole plant has been performance and pressure tested in our factory. This safety can be achieved with a TREATMENT frame-mounted plant or a container-installed plant.

We have constructed many different custom-made plants adapted to specific demands and wishes.

We are happy to make quotations for start-up of plants and training of the operating crew

- Connected piping between equipment pumps, vessels, skids, tanks

- Cabling and wiring of pumps and instrumentation inside the container to main control cabinet.

Containization presents many advantages:

♦ Limited civil works (only container foundation)

♦ Fast implementation (turnkey "plug and play"unit)

♦ Mobility

Plant Size:

Depending on the plant size 10, 20 or 40 ft container(s) are available

Standard container

Insulated Container (Hot/Cold)